Sense Navigation Installation Quick Start Guide

Installing Sense Navigation 2011 Instructions
May 31, 2011

Normally Sense Navigation is installed in the firmware of the Sense note taker, for this initial release we will replace the older firmware version of Sense Navigation with this 2011 version.  
1. Go to http://www.gosendero.com and login with your User Id and password.  Note: your User Id is no longer your serial number.  Instead it is your devices MAC address.  Your MAC address is located in the information section of help.  From the program menu, press H for help, then scroll to information or press I.  
2. Download the SenseNavigation_2011_US_English.zip or SenseNavigation_2011_UK_English.zip file depending on your language.  Other languages will be forth coming in the near future.  Make a note of your Sendero License Key while logged into your account as you will need this in Step 8.
3. Using a USB cable, connect your Sense Notetaker to your computer and unzip the zip file to the root of your flash disk.  If you go into file manager you should see a folder called Sense Navigation
 on your flash disk.  You can also just unzip the SenseNavigation_2011_US_English.zip  or UK version zip file on your PC then copy the Sense Navigation folder contained within the zip file to the root of your Notetakers flash disk.
4. Disconnect the USB cable from the Sense Notetaker.  
5. Revive the Sense Notetaker by pressing and holding the forward media key and pressing the reset button.  Keep the forward media key held down until you hear the musical chime.  Note: the forward media key is to the left of the power switch.
6. Press V or scroll to Sense Navigation and press ENTER.  The installation process will start.  When prompted press the reset button one more time.  
a. If the installation does not start either you didnt unzip and put the Sense Navigation folder on the root of your Flash Disk correctly in Step 3, or you still have your USB cable connected to your computer which you should have removed in Step 4.
b. If that is not the problem maybe you didnt get a complete download in Step 2.  Make sure the file size of the zip file matches what the website says is the file size,
7. After you have preformed the normal reset as per the installation instructions and the system has restarted press the V key to start Sense Navigation 2011.
8. If this is the first time installing Sense Navigation, you will be prompted for your license key.  Your Sendero License Key is located in your account at http://www.gosendero.com.
Note: You will need to reinstall Sense Navigation if your battery goes flat or you have removed your battery because it is not in the firmware.  It is recommended to leave the Sense Navigation folder on your flash disk, in this way all you will need to do is press V to start the Sense Navigation installation after the revive.

